Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Kubota › Kubota U48-5

Fitment Verified - Quick Attach K7915

Kubota U48-5 Buckets & Attachments

The Kubota U48-5 is a 5-ton U Series excavator with a tight tail swing, launched as a newer-generation machine that fits between the U35-4 and U55-5. It gives you much of the digging and lifting power of a conventional-tail machine while keeping the counterweight close to the tracks for work beside buildings, fences and traffic. Typical jobs include utility trenching, footings, drainage, septic work and loading trucks on tight sites. Factory thumb brackets and auxiliary relief are standard. Every attachment on this page is matched to the U48-5's Kubota quick attach and sized for its class. Call with your serial number if you're unsure of your coupler.
COUPLER
Quick Attach K7915
SIZE CLASS
50CL
WEIGHT
10848 LBS
DIG DEPTH
10' 8"
Shop 9 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Kubota U48-5

Kubota U48-5 specifications

Make
Kubota
Model
Kubota U48-5
Size class
50CL
Coupler
Quick Attach K7915
Operating weight
10848lbs
Max dig depth
10' 8"
Engine HP
38.9
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

Kubota U48-5 attachment FAQ

What quick coupler fits a Kubota U48-5?

Kubota machines use model-specific quick attach couplers, and our catalog groups them by coupler model (K7870A, K7915 and K7402). The U48-5 is in the 5- to 6-ton class that uses the K7915, and each attachment on this page is matched to it. If your machine has a different coupler, send us a photo or your serial number.

What's the difference between the Kubota U48-5 and U55-5?

The U48-5 is the smaller of the two, at about 10,850 lb and 38.9 net hp, versus about 12,250 lb and 46.4 net hp for the U55-5. The U55-5 also digs about 1' 3" deeper. Both are tight-tail machines, so choose based on the size of your typical jobs and what you can haul.

Can the Kubota U48-5 run a hydraulic thumb?

Yes. Kubota lists a thumb bracket and relief valve as standard equipment on the U48-5, which makes adding a thumb straightforward. Confirm thumb width against your bucket size so the two close together properly.

Not sure it fits your Kubota U48-5?

More Kubota U48-5 machines