Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Kubota › Kubota KX61-3

Fitment Verified - Quick Attach K7870A

Kubota KX61-3 Buckets & Attachments

The Kubota KX61-3 is a 2.6-ton class KX Series mini excavator that replaced the KX61-2 around 2004. It's a conventional tail swing machine and was sold mainly outside North America, so you'll often see it on imported or European-spec machines. The KX61-3 is well suited to landscaping, utility and irrigation trenching, drainage and small footings, and a long-arm version was offered for extra reach. Many are set up with pin-on buckets, though some have couplers. Every attachment on this page is matched to the KX61-3's size class. Call us with your serial number or send measurements of your current bucket to confirm pin size and ear spacing.
COUPLER
Quick Attach K7870A
SIZE CLASS
35CL
WEIGHT
5732 LBS
DIG DEPTH
9' 0"
Shop 8 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Kubota KX61-3

Kubota KX61-3 specifications

Make
Kubota
Model
Kubota KX61-3
Size class
35CL
Coupler
Quick Attach K7870A
Operating weight
5732lbs
Max dig depth
9' 0"
Engine HP
24.4
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

+ 9 more machines on the same coupler.

Kubota KX61-3 attachment FAQ

What's the difference between the Kubota KX61-2 and KX61-3?

The KX61-3 is the newer generation, with an updated engine, hydraulics and operator station compared with the KX61-2. They're in a similar size class, but mounting dimensions can differ, so confirm with measurements or your serial number before moving attachments between them.

Does the Kubota KX61-3 have a quick coupler?

Many KX61-3 machines are pin-on, while others were fitted with a coupler by the dealer or a previous owner. Send us a photo of your bucket mount or measure the pin diameter and ear spacing, and we'll help you match an attachment.

Can a Kubota KX61-3 run a thumb?

Yes. A thumb is a common add-on for a machine this size, and helps with rock, brush and debris. Hydraulic thumbs require an auxiliary circuit, while a manual thumb is a simpler bolt-on option.

Not sure it fits your Kubota KX61-3?

More Kubota KX61-3 machines