Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Bobcat › Bobcat E48

Fitment Verified - MX4

Bobcat E48 Buckets & Attachments

The Bobcat E48 sits at the top of the 4- to 5-ton range, and its extra weight over the E42 shows when you're running a wide bucket, breaking up hard ground or lifting pipe and stone. Owners use it for excavation on new builds, utility installs, land clearing and general site work where a bigger machine would be overkill. Choosing the right attachments matters more at this size, because a well-matched bucket keeps the E48 fast and fuel-efficient. Pick from the options below, all built for the E48's coupler and capacity, or call us and we'll recommend a setup for the work you do most.
COUPLER
MX4
SIZE CLASS
WEIGHT
9830 LBS
DIG DEPTH
10' 5"
Shop 8 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Bobcat E48

Bobcat E48 specifications

Make
Bobcat
Model
Bobcat E48
Size class
Coupler
MX4
Operating weight
9830lbs
Max dig depth
10' 5"
Engine HP
42.6
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

Bobcat E48 attachment FAQ

Is the Bobcat E48 bigger than the E42?

Yes, slightly. The E48 is heavier than the E42, which gives it more stability with wide buckets and heavy lifts. You can compare the exact specs at the top of each machine's page.

What attachments are best for a Bobcat E48?

Most E48 owners start with a general-purpose tooth bucket, a narrower trenching bucket and a wide ditch or grading bucket. A ripper is a smart addition if you work in rock, clay or frozen ground.

Can a Bobcat E48 run a hydraulic hammer?

Yes, the E48's auxiliary hydraulics can power a hammer. The hammer needs to match the machine's weight and hydraulic flow; any hammer we list for the E48 is sized for it, and we're happy to help you choose.

Not sure it fits your Bobcat E48?

More Bobcat E48 machines