Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Case › Case CX36

Fitment Verified - Pins (40mm)

Case CX36 Buckets & Attachments

The Case CX36 gives you a bit more weight and digging force than the CX31 while keeping the same go-anywhere size. Like its smaller sibling, the B-Series CX36 is a zero-tail-swing machine, so the back of the house never swings past the tracks. That makes it a favorite for utility contractors, landscapers and rental fleets working along streets and between houses. Because the CX36 uses pin-on attachments, choosing the right bucket means matching its pin size and ear spacing. Every attachment below is built for the CX36, ships with pins and is sized to keep the machine stable with a full load.
COUPLER
Pins (40mm)
SIZE CLASS
35CL
WEIGHT
7738 LBS
DIG DEPTH
10' 2"
Shop 11 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Case CX36

Showing 11 of 11 attachments, all matched to the Case CX36.

Case CX36 specifications

Make
Case
Model
Case CX36
Size class
35CL
Coupler
Pins (40mm)
Operating weight
7738lbs
Max dig depth
10' 2"
Engine HP
23.7
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

+ 11 more machines on the same coupler.

Case CX36 attachment FAQ

What's the difference between the Case CX31 and CX36?

The CX36 is the slightly larger of the two, with more weight and digging force, while both share a compact zero-tail-swing design. They use the same pin size in our catalog, but bucket sizing is matched to each machine, so shop from the page for the model you own.

What pin size is the Case CX36?

Our CX36 attachments are made for 40 mm pins, with ear width and pin spacing matched to the CX36. If your machine has an aftermarket coupler instead of a direct pin-on setup, let us know when you order.

What size bucket should I run on a Case CX36?

Most CX36 owners keep a narrow tooth bucket for trenching, a mid-width bucket for general digging and a wider smooth-edge bucket for grading and backfill. If you're unsure which widths suit your work, give us a call.

Not sure it fits your Case CX36?

More Case CX36 machines