Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Caterpillar 315D

Fitment Verified - Pins (70mm)

Caterpillar 315D Buckets & Attachments

The Cat 315D L is a 17-ton conventional tail swing excavator, the last of the original 315 line that ran from the mid-1990s through the 315, 315B and 315C. It has a 115 hp Cat C4.2 engine and digs to 19' 11" with the reach boom and 8' 6" stick, so it still earns its keep on utility work, site development and truck loading. Around 2008 Cat replaced it with the 316E, and the line continued as today's 317. The 315D and older use a 70 mm pin bucket linkage, and every attachment on this page is matched to that pin size and ear spacing and ships with pins.
COUPLER
Pins (70mm)
SIZE CLASS
160CL
WEIGHT
38095 LBS
DIG DEPTH
19' 11"
Shop 15 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Caterpillar 315D

Showing 15 of 15 attachments, all matched to the Caterpillar 315D.

Caterpillar 315D specifications

Make
Caterpillar
Model
Caterpillar 315D
Size class
160CL
Coupler
Pins (70mm)
Operating weight
38095lbs
Max dig depth
19' 11"
Engine HP
115
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

Caterpillar 315D attachment FAQ

What pin size does the Cat 315D use?

The 315D and the older 315, 315B and 315C use a 70 mm pin bucket linkage. Everything on this page is built for 70 mm pins and ships with pins. The newer zero tail swing 315F and 315 Next Gen use 65 mm pins instead.

Will Cat 316 or 317 attachments fit my 315D?

The 316E, 316F and 317 that replaced the 315D also use a 70 mm pin linkage, so we list them in the same size class. Ear width can vary by year, so check your measurements or call us before ordering.

How can I tell if I have a 315D or a 315F?

The 315D and older are conventional tail swing machines, so the counterweight hangs out past the tracks when it swings. The 315F and newer are zero tail swing. If you're not sure, send us a photo of the serial number plate or a side shot of the machine and we'll tell you which linkage you have.

Not sure it fits your Caterpillar 315D?

More Caterpillar 315D machines