Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Kubota › Kubota KX91-2

Fitment Verified - Quick Attach K7870A

Kubota KX91-2 Buckets & Attachments

The Kubota KX91-2 is an earlier-generation 3.5-ton class compact excavator with a conventional tail swing, built from the mid-1990s into the early 2000s and followed by the KX91-3. It's a common used machine on farms, landscaping crews and small contractor fleets, with enough reach for footings, drainage, septic repairs and utility trenches while staying light enough to tow with a heavy pickup and trailer. Many KX91-2s are pin-on or carry older couplers rather than today's Kubota quick attach. Every attachment on this page is matched to the KX91-2's mounting and sized for its class, and we recommend calling with your serial number to confirm fit.
COUPLER
Quick Attach K7870A
SIZE CLASS
35CL
WEIGHT
7165 LBS
DIG DEPTH
10' 3"
Shop 8 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Kubota KX91-2

Kubota KX91-2 specifications

Make
Kubota
Model
Kubota KX91-2
Size class
35CL
Coupler
Quick Attach K7870A
Operating weight
7165lbs
Max dig depth
10' 3"
Engine HP
27.5
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

+ 9 more machines on the same coupler.

Kubota KX91-2 attachment FAQ

What attachments fit a Kubota KX91-2?

Tooth buckets for digging and trenching, wider grading buckets for cleanup, rippers and thumbs are the most common KX91-2 attachments. Fit depends on whether your machine is pin-on or has a coupler, so send us a photo of your current bucket's mounting or your serial number before ordering.

What is the difference between the Kubota KX91-2 and KX91-3?

The KX91-3 replaced the KX91-2 in the early 2000s and is close in size, around 7,100 lb operating weight. The -3 brought updated hydraulics and operator features, and mounting setups can differ between the two. Shop from the page for the exact model you own.

Will a hydraulic thumb work on a Kubota KX91-2?

Yes, a thumb is a popular addition for handling rock, brush and debris on a machine this size. Mechanical thumbs need no extra plumbing, while a hydraulic thumb needs auxiliary hydraulics routed to the arm. Thumbs in the 24" range are typical for this class.

Not sure it fits your Kubota KX91-2?

More Kubota KX91-2 machines