Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Kubota › Kubota KX71-3

Fitment Verified - Quick Attach K7870A

Kubota KX71-3 Buckets & Attachments

The Kubota KX71-3 is a 3-ton class KX Series mini excavator with a conventional tail swing, and one of Kubota's longest-running compact models. It replaced the KX71-2 and was later updated as the KX71-3S. It's a favorite with landscapers, plumbers, utility crews and rental fleets for trenching, drainage, footings, septic repairs and small demolition. It's easy to haul and gentle on finished ground, but still has the weight to dig steadily. Every attachment on this page is matched to the KX71-3's size and mounting. Because earlier and later KX71-3 machines can differ, call us with your serial number or send a photo of your bucket mount to confirm fit.
COUPLER
Quick Attach K7870A
SIZE CLASS
35CL
WEIGHT
6305 LBS
DIG DEPTH
9' 9"
Shop 8 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Kubota KX71-3

Kubota KX71-3 specifications

Make
Kubota
Model
Kubota KX71-3
Size class
35CL
Coupler
Quick Attach K7870A
Operating weight
6305lbs
Max dig depth
9' 9"
Engine HP
24.4
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

+ 9 more machines on the same coupler.

Kubota KX71-3 attachment FAQ

Does the Kubota KX71-3 use a quick coupler or pins?

Many KX71-3 machines are pin-on, while others were fitted with a coupler by the dealer or a previous owner. Send us a photo of your bucket mount or measure pin diameter and ear spacing, and we'll help match the right attachment.

What size bucket is best for a Kubota KX71-3?

A 9- to 12-inch tooth bucket is common for irrigation and utility trenches, and a 16- to 18-inch bucket for general digging. A wider smooth-edge bucket is faster for grading and backfill. Oversized buckets slow cycle times on a 3-ton machine.

Can a Kubota KX71-3 run a thumb or hammer?

Yes. A thumb is one of the most popular add-ons for the KX71-3, and a breaker sized for a 3-ton excavator can work if the auxiliary circuit is set up for it. Match the hammer's weight and flow requirements to the machine.

Not sure it fits your Kubota KX71-3?

More Kubota KX71-3 machines