Home › Guides › Quick couplers
Excavator Quick Coupler Guide: X-Change, Kubota & Wedgelock
If your mini excavator has a factory quick coupler, the bucket has to match the coupler, not just the machine size. Here’s how to tell Bobcat X-Change MX2, MX3 and MX4, Kubota K7870A, K7915 and K7402, and Wedgelock 35, 50 and 60CL apart, and which buckets fit each.
No coupler, just pins? Use our pin measuring guide instead.
Bobcat X-Change (MX2, MX3, MX4)
X-Change is Bobcat’s mounting system for its compact excavators. The size, MX2, MX3 or MX4, goes up with the machine. A bucket built for one size won’t lock onto another, so match the size, not just the brand.
MX2
Smaller Bobcat minis
The smaller X-Change size. Fitment varies by model and year, so call us with your model and serial number and we’ll confirm before you order.
Shop MX2 buckets →MX3
Roughly 2.5–4 ton machines
Bobcat E26, E32, E35, E38, E40*, E42*, 329, 331, 331E, 334, 430
Shop MX3 buckets →MX4
Roughly 4–6 ton machines
Bobcat E40*, E42*, E45, E48, E50, E55, E60, E63, 335, 337, 341, 435
Shop MX4 buckets →*The E40 and E42 have been built with both MX3 and MX4 couplers. Check yours (see “Which one do I have?” below) or send us the serial number.
Kubota quick attach (K7870A, K7915, K7402)
Kubota’s factory quick couplers come in sizes that track the machine’s weight. We list them by coupler number: K7870A (what Kubota calls the 4T coupler), K7915 (5T) and K7402 (8T). The number on your coupler is the surest match; the model lists below are the machines we’ve matched to each.
K7870A
Kubota 4T coupler
KX030-4, KX033-4, KX040 (-4, -5), KX61 (-2, -3), KX71 (-2, -3), KX91 (-2, -3), KX121 (-2, -3, -3ST), U20-3, U33-4, U35, U35-4
Shop K7870A buckets →Wedgelock (35, 50, 60CL)
Wedgelock couplers are common on Hitachi and John Deere compact excavators. The number is the size class. A 35CL bucket won’t lock into a 50CL coupler, so match the class to your machine.
35CL
About 2.5–3.5 ton
Hitachi ZX30, ZX35 · John Deere 26G, 30G, 35G (and P-Tier)
Shop 35CL buckets →Which one do I have?
1. Look up your machine
The fastest way: find your machine. Each machine page shows its coupler and only the attachments that fit.
2. Check the coupler itself
Most factory couplers have a tag or casting with the size or part number. Wipe it clean and take a photo. If your old bucket came from the dealer, the part number on the bucket often names the coupler size too.
3. Machine was bought used?
Couplers get swapped. A machine can wear a different coupler than it left the factory with, or an aftermarket one. If anything looks off, send us photos of the coupler and the serial plate and we’ll identify it.
Can I run pin-on buckets instead?
Yes, if you remove the coupler. Pin-on buckets then go straight onto the stick. Use the pin measuring guide to size them.