Skip to main content
BF Sales
$0.00 0

Cart

No products in the cart.

(315) 606-0056
Home › Machines › Kubota › Kubota KX61-2

Fitment Verified - Quick Attach K7870A

Kubota KX61-2 Buckets & Attachments

The Kubota KX61-2 is a 2.5-ton class KX Series mini excavator built from the late 1990s until about 2004, when it was replaced by the KX61-3. It's a conventional tail swing machine with a compact footprint, which makes it a good fit for landscapers, small contractors and property owners. Typical KX61-2 jobs include trenching for water, electric and drainage lines, small footings, pond work and landscaping. Most KX61-2 machines are pin-on, so attachments mount directly with pins. Every attachment on this page is matched to the KX61-2's size class. Call us with your serial number or send measurements of your current bucket to confirm pin size and ear spacing.
COUPLER
Quick Attach K7870A
SIZE CLASS
35CL
WEIGHT
5910 LBS
DIG DEPTH
9' 0"
Shop 8 attachments
Fitment Confirmed Send your make, model & serial – we check it before it ships.
NM400 Wear Parts Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY Questions? Real people at 315-606-0056.

Attachments that fit the Kubota KX61-2

Kubota KX61-2 specifications

Make
Kubota
Model
Kubota KX61-2
Size class
35CL
Coupler
Quick Attach K7870A
Operating weight
5910lbs
Max dig depth
9' 0"
Engine HP
27
Specs vary by configuration and generation. Call us to confirm your machine

These attachments also fit

Other machines that use the same coupler

+ 9 more machines on the same coupler.

Kubota KX61-2 attachment FAQ

What's the difference between the Kubota KX61-2 and KX61-3?

The KX61-3 replaced the KX61-2 around 2004 with an updated engine, hydraulics and operator station. They're in the same 2.5-ton class, but pin and mounting dimensions can differ, so confirm with your serial number or measurements before swapping attachments.

Does the Kubota KX61-2 use a quick coupler?

Most KX61-2 machines are pin-on. Some have aftermarket couplers added. Measure your pin diameter and the inside width between your bucket ears, or call us with your serial number, so we can match the right attachment.

What size bucket is best for a Kubota KX61-2?

A 9- to 12-inch tooth bucket is a common choice for utility and irrigation trenches, with a 16- to 18-inch bucket for general digging and a wider smooth-edge bucket for grading and cleanup. Going too wide on a machine this size slows cycle times.

Not sure it fits your Kubota KX61-2?

More Kubota KX61-2 machines