Fitment Verified - Pins (50mm)
Kobelco SK80 Buckets & Attachments
The Kobelco SK80 is an earlier-generation 8-ton excavator in the midi class, built for contractors who need full-size reach and lifting in a machine that's still easy to transport. Kobelco's current machine in this size is the SK85CS-7, a compact-swing model, so owners of either may search under both names. The SK80 is a dependable choice for utility installs, site prep, drainage and truck loading. It uses pin-on attachments, and every attachment on this page is matched to its pin size and ear spacing, ships with pins and is sized to its capability.
COUPLER
Pins (50mm)
SIZE CLASS
80CL
WEIGHT
16887 LBS
DIG DEPTH
13' 8"
Fitment Confirmed
Send your make, model & serial – we check it before it ships.
NM400 Wear Parts
Base edge, side cutters & wear strips in NM400 steel.
In Stock & Ready
Hundreds of buckets on the shelf in Central New York.
Ships from Canastota, NY
Questions? Real people at 315-606-0056.
Attachments that fit the Kobelco SK80
Showing 14 of 14 attachments, all matched to the Kobelco SK80.
-
✓ Fits SK80
Buckets
14'' HD Tooth Bucket for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BHD-MX-50-14
$1,829.00
View details →
-
✓ Fits SK80
Buckets
18'' HD Tooth Bucket for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BHD-MX-50-18
$2,300.00
View details →
-
✓ Fits SK80
Buckets
24'' HD Tooth Bucket for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BHD-MX-50-24
Original price was: $2,205.00.$1,323.00Current price is: $1,323.00.
View details →
-
✓ Fits SK80
Buckets
30'' HD Tooth Bucket for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BHD-MX-50-30
Original price was: $2,466.00.$1,480.00Current price is: $1,480.00.
View details →
-
✓ Fits SK80
Buckets
36'' HD Tooth Bucket for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BHD-MX-50-36
$2,150.00
View details →
-
✓ Fits SK80
Buckets
48'' Ditch Bucket BOCE for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BDC-MX-50-48
$2,750.00
View details →
-
✓ Fits SK80
Buckets
48'' Tilt Ditch Bucket BOCE for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BDT-MX-50-48
$5,474.00
View details →
-
✓ Fits SK80
Buckets
48" Screening Bucket BOCE for 80CL Excavator with 50mm pins
Pins · 50 mm pins SKU: BSK-MX-50-48
$3,905.00
View details →
-
✓ Fits SK80
Buckets
72" Low Profile Hydraulic Tilt Bucket for 80CL Excavator
Pins · 50 mm pins SKU: BDT-MX-50-72
$6,000.00
View details →
- Photo coming soon ✓ Fits SK80 Rippers 80CL Heavy Duty Ripper Pins · 50 mm pins SKU: RPR-MX-50-1S $1,450.00 View details →
-
✓ Fits SK80
Plate Compactors
CP80 Plate Compactor for 80CL Excavator
Pins · 50 mm pins SKU: CP-80CL
$6,998.00
View details →
- Photo coming soon ✓ Fits SK80 Plate Compactors CT80 Compactor Top for 80CL Excavator Pins · 50 mm pins SKU: CT-80-305-205-50 $1,200.00 View details →
-
✓ Fits SK80
Hammers
DA 80 Hammer
Pins · 50 mm pins SKU: RT-80CL-75
$11,990.00
View details →
- Photo coming soon ✓ Fits SK80 Hammers Hammer Top for 80CL Excavator Pins · 50 mm pins SKU: HT-DA80-305-200-50 $1,800.00 View details →
Kobelco SK80 specifications
Make
Kobelco
Model
Kobelco SK80
Size class
80CL
Coupler
Pins (50mm)
Operating weight
16887lbs
Max dig depth
13' 8"
Engine HP
46.7
Specs vary by configuration and generation. Call us to confirm your machine
These attachments also fit
Other machines that use the same coupler
Kobelco SK80 attachment FAQ
What pin size does the Kobelco SK80 use?
Our SK80 attachments are built for 50 mm pins, with ear width and pin spacing matched to the machine.
What replaced the Kobelco SK80?
Kobelco's current machine in this size class is the SK85CS-7. Attachment sizing can differ between the two, so confirm which model you own before ordering.
What attachments are best for a Kobelco SK80?
Most SK80 owners run a heavy-duty digging bucket, a trenching bucket and a wide ditch bucket. A ripper helps in rock and frozen ground.